ULF-1 Discussion Archive
Anonymous static archive of the former Mailman list
Anonymous static archive of the former Mailman list
Re: [ULF-1] Plywood
Call Cheryl. She will special order it for you. The ply is aircraft quality Finnish birch. I was lucky as the wholesaler is 30 mins. from my house in NC, and I was able to pick it up directly. Not sure what the the shipping will be to PA, but it is thin enough to roll fairly tightly. Member 67 ---- Member 98 <[email]> wrote: > I did not find any 0.6mm ply on their website. Is it special order? Is it Finnish Birch or Baltic Birch cabinet ply? Member 98 Restorations Member 98 - Gunsmith 565 Oak Lane Lititz, PA [phone] www.VicknairRestorations.com vicknairgunsmithing.blogspot.com ________________________________ From: "[email]" <[email]> To: Grupo ULF-1 <[email]>; [email] Cc: Member 11 <[email]> Sent: Tuesday, August 5, 2014 4:07 PM Subject: Re: [ULF-1] Plywood Hi Group, We have finished all the tail surfaces, fuselage components, including bulkheads #1 and #2, tail boom, seat beam, forward fuselage sides. We are currently building the 4 wing spar caps. I have a source for the .6 mm ply for the tail surfaces: Cheryl Lewis, ([phone], hardwoodstore.com, The Hardwood Store of NC. We ordered 3, 60 x 60" sheets @ $61 per sheet, but used only 2 sheets. We have a whole extra sheet as a spare. Best Regards, Member 72 S.N. 343E ---- Member 11 <[email]> wrote: > Hi Andrew! > Which plywood thickness do you use in the stabilizer and fin leading edge? The plans call for 0.6 mm. but I only find 0.4 and 0.8 mm. in Aircraft Spruce catalog. > Thank you! > > Diego > Enviado desde mi iPad > _______________________________________________ > ULF-1 discussion list -- [email] > > Subscribe, Unsubscribe, Preferences, List information: > http://lists.ulf-1.com/listinfo.cgi/ulf-1-ulf-1.com _______________________________________________ ULF-1 discussion list -- [email] Subscribe, Unsubscribe, Preferences, List information: http://lists.ulf-1.com/listinfo.cgi/ulf-1-ulf-1.com