Re: [ULF-1] T-88 for glueing ULF-1

From: Member 72
Date: 2012-12-09 21:29 UTC-05:00
Message: #0424

Hi Svenning,

We started construction on our ULF-1 10 months ago, and have been using T-88.  Our build team had a long discussion about which glue to use, and we finally settled on T-88.  It is easy to use. In some areas where we do want it to run, or to fill in gaps, we have mixed it with cotton flox and that works really well too.

Best regards and good luck in building your ULF-1,
Member 72

---- "Member 79" <[email]> wrote: 
> Hello! Is the T-88 a more practical glueing for the ulf-1? Descriptions seem to present it as a more convenient glueing since it is less sensitive to working temperature, clamping pressure, curing time etc. (Aerolite/aerodux is not very popular in Australia due to climate and durability issues)
> 
> Rgds,
> Svenning Member 79