[ULF-1] Fw: Aerolite Adhesive

From: Member 81
Date: 2012-01-21 12:10 UTC-08:00
Message: #0344
----- Forwarded Message ----
From: Member 81 <[email]>
To: [email]
Sent: Sat, January 21, 2012 3:07:49 PM
Subject: Re: [ULF-1] Aerolite Adhesive


I am a professional boat builder in Miami and have used RESORCINAL over the 
years. It was the first waterproof glue that had tremendous strength. Two things 
you should be aware of:
      1) take precautions not to inhale it or get it into cuts.

       2) your joints have to be absolutely perfect and require very good 
clamping pressure. Typical 

            example that you might recognize are scarfs in spruce masts on 
sailboats which are difficult to 

            find if done correctly.

     My advice is to use a high quality liquid epoxy with an additive to thicken 
it. You can contact West
     Epoxy for their advice since boats don't fly.




________________________________
From: "[email]" <[email]>
To: [email]
Sent: Sat, January 21, 2012 2:17:31 PM
Subject: Re: [ULF-1] Aerolite Adhesive

Thanks, Ron.  It looks like I will abandon my search for this glue in favor of 
alternatives such as polyurethane, resorcinol, and epoxies.
Member 67


---- ron <[email]> wrote: 
> Hi, this might be worth a try, even explains how to manufacture your own
> glue.
> 
> 
> 
> www://seqair.com/skunkworks/glues/Aerolite/Aerolite.html
> 
> 
> 
> Then click onAerolite sources
> 
> 
> 
> Or try
> 
> 
> 
> [email] 
> 
>  
> 
> (804) 374-2904begin_of_the_skype_highlighting            (804) 
>374-2904      end_of_the_skype_highlighting 
>
> 
>  
> 
>  
> 
> -------Original Message-------
> 
>  
> 
> From: [email]
> 
> Date: [phone]:08:10
> 
> To: [email]
> 
> Subject: [ULF-1] Aerolite Adhesive
> 
>  
> 
> Hi builders,
> 
>  
> 
> I am trying to find a source for Aerolite adhesive here in the states.  (I
> know folks in Europe can get it with no problem.)  Any leads?  I am planning
> on using Aerolite for most components except main structural members like
> spars, where I will use FPL-16A epoxy.
> 
>  
> 
> I am anxious to get started with the build.
> 
>  
> 
> Thanks for any help.
> 
>  
> 
> Member 72
> 
>  
> 
>  
> 
> _______________________________________________
> 
> ULF-1 discussion list -- [email]
> 
>  
> 
> Subscribe, Unsubscribe, Preferences, List information:
> 
> http://lists.ulf-1.com/listinfo.cgi/ulf-1-ulf-1.com

_______________________________________________
ULF-1 discussion list -- [email]

Subscribe, Unsubscribe, Preferences, List information:
http://lists.ulf-1.com/listinfo.cgi/ulf-1-ulf-1.com


_______________________________________________
ULF-1 discussion list -- [email]

Subscribe, Unsubscribe, Preferences, List information:
http://lists.ulf-1.com/listinfo.cgi/ulf-1-ulf-1.com